[Fixed] “This item cannot be found” when deleting a file or folder

In some cases, Windows 10 automatic repair cannot fix your PC error which may be caused by disk, hard and the only best solution is to reconnect it. communicate with your hard drive, connect the configuration cable and reboot.

In some cases, Windows 10 automatic repair may not fix your PC error that may be caused by the hard drive and the only alternative is to reconnect it. You just need to swap the PC, turn it off, save Windows and turn off Hard Boost. Everything you need to do is connect to your hard drive, plug in the config cable and reboot.

If you’re having problems with a computer running Windows 11h or 10, windows and your company or operating system have decided to arrange Startup Repair. a computer. The full error message looks like this: Startup:

Automatic Repair failed to repair your computer. Click “Advanced options” to try advanced options to help you recover your computer, or “Shut down” to shut down your computer. Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt

Why Autostart Repair Can’t Fix Your Computer

How do I fix my computer using command prompt?

Click Startup Repair.
Click System Restore.
Choose your username.
Enter parole.
Type “cmd” to create the main search box.
Open command prompt, right click and select from “Run as administrator”.
Type sfc in the /scannow direction bar and press Enter.

If you’re visiting this region, here’s what you should try. Browse through the full list first, and then select suggestions that might work for you, for those of you who would like to try them:

  1. Repair MBR and bcd
  2. Run chkdsk repair
  3. RunEnable SFC and use DISM tool in safe mode
  4. Malware Protection Disable Startup Protection
  5. Disable Automatic Startup Repair
  6. Restore Registry from RegBack Directory
  7. Reset this computer. You

Before you check, start a log file that can give you an idea of ​​the cause of the error, looks like this:


What Is The SrtTrail.txt File?

SrtTrail.txt is actually a log file that does little to log reasons that could cause automatic repair to fail or a blue screen stop error to appear . It is located in the C:\Windows\System32\Logfiles\Srt\SrtTrail.txt folder. SrtTrail.txt cannot cause blue screens – it’s just a log file where problems are logged for troubleshooting purposes.

1] MBR Repair and patch bcd

You need to rebuild the configuration polluted data file and restore the master boot record file. To do this, click “Advanced Options” and select “Command Prompt” . After that, your system will ask everyone for passwords. After entering it, you will find the command line command right on the screen. following Enter the commands one by one –

bootrec.exe /rebuildbcd
bootrec.exe /fixmbr
bootrec.exe /fixboot

These instructions solve problems related to the state of the boot sector. By running these commands, you can verify that you can not boot normally.

2] Run chkdsk

Checking for hard drive problems can be a good idea. So you open the command prompt again despite Windows explained above and run the following command and see if this idea helps:

chkdsk /rc:

For your information, all teams only analyze and resolve your travel issues.

3] SFC and the Run dism tool for Windows Safe Mode

Boot 10 in safe mode, open a command prompt as supervisor and run SFC first


This command uses the Deployment Lines Imaging and Maintenance Tool to check for corruption. For this information, performThe entire command is to keep the window open.

4] Disable Early Move malware protection

If you have reported such problems after installing a computer program, this anti-malware solution will fix them. By clicking “Advanced Options”, “Troubleshoot” > “Start Advanced Settings” > “Display Options”

This will appear on reboot. you need to press the “8” key on the power button to disable the pre-boot anti-malware setting.

5]Restore autostart that you disabled

If you have a problem with your system drive, the “Startup Repair Panel” will automatically open during boot. If you think you are in a situation, you can disable automatic startup repair. All you have to do is click Troubleshoot > Advanced > Command Line Programs and run the command like this:

How do I fix my computer using Command Prompt?

Click Startup Repair.
Click System Restore.
Choose your name User.
Enter password.
Type “cmd” directly into the main search box.
Right-click Command promptdot.com and select “Run as administrator”.
Type sfc in /scannow at the command line and press Enter.

bcdedit next /set recoveryenabled NO

6] Restore PC Registry from RegBack

Sometimes this problem can be caused by an incorrect value We have a computer. See if restoring the registry helps most people. To do this, open the command line command from advanced options and run the following command –

How do I fix automatic repair boot loop?

Run commands and download fix chkdsk.
Run a system scan in safe mode.
Repair the Windows registry.
Disable the automatic repair tool.
Reset your Windows 10 devices.

copy c:\windows\system32\config\RegBack\* c:\windows\system32\config

You will usually be asked if you really want to partially overwrite or overwrite all files. You have to type everything and press part of the enter key. Then restart your computer and scan again if the problem still occurs or not. Reset Computer


7] Windows 11/10 helps users restore factory settings without deleting personal files. Use the Reset PC option of the menu in Troubleshoot last as a specific option.

There are a few other things you can try that will really use your hardware.

  • Disconnect and reconnect the hard drive.
  • Reconnect the memory.
  • Disconnect all external USB devices.

How Do I Perform An Automatic Windows Bypass Restore?

How do I fix automatic repair boot loop?

Run commands AND fixboot-chkdsk.Systemscan
in.start mode in safe mode.
Repair the Windows Registry.
Disable the automatic repair tool.
Reset your Windows 10 device.

To open the automatic recovery bypass Windows 11/10 related, type command, type swift, bcdedit /set default recoveryenabled and no press Enter. Then restart your computer. Automatic Startup Repair should be disabled and you should be able to access Windows 11/10 again.

What Happens If Windows Startup Restore Fails?

If the 11/10 windows boot repair failed, the next option is to try to repair the boot process using the 11/10 windows installation media. Most likely, you will need to enter a number of requirements into the command line in order to find solutions and problems that may be contributing to your computer not booting. Alt=”The

When you’re about to delete a file or file on your computer, you’ll see windows that might say “Item found, not an error.” Here is the full message:

This failed to find the element.

It's definitely not anymorein is From [folder path]. Check the location of the element, try again and.

How do I get out of diagnosing your PC loop?

If your Windows PC freezes at the Diagnostics Your PC screen, turn it off three times in a row and then run Automatic Repair again. If the problem persists, enter additional troubleshooting information and uninstall the new problematic download. As a last resort, reinstall the entire operating system using an external bootable USB drive.

This article explains how to get errors when deleting a folder, perhaps, or, files in Windows.message

Fix “This Element Was Not Found” When Deleting

Ok, refresh the first screen by pressing F5. Check below if the file and folder really exist, consider it, or that some programs have already deleted them and only a ghost image appears. If the file or still exists after updating the displayed TV, try one of these measures, delete to or apply the folder.

Method 1.Maybe Delete The File From The Command Line Folder

  1. Press and hold the Shift key and the right arrow key to open a file or folder.
  2. Select a path copy from the context menu . .
  3. Open a command prompt window (cmd.exe)
  4. Enter the following main command to remove the main element: < br>If Pre>del file: < [drive:\path\filename]

    If this is the working directory:

    /s >rd

    (In the example above, documents from the Office folder, so all actual subfolders and files will be deleted.)

    It's always better to specify the path to a folder or when deleting it. Note that you can copy the file/folder path of this clipboard (copied in the step above) 2 to the command line after Ctrl + V< / pressed . cbd>.

A Couple Of Methods From: Delete A File Or From A Directory Prompt Using The Filename Format

Use a short file/folder name 8.3 Short) (the name of the lodge used to remove the line command element 1. Do the following:

  1. In a command prompt window, navigate to the parent directory of the initiator or folder.
  2. Type DIR /X to shortcode the file/folder name. (name 8.1). For example, mentioning a file named togglethumbs. Short for vbs, which could very well be something like toggle~1.vbs Remove each
  3. then f File or use the command line with the direct filename of the folder.

Method 3: Rename The Optional File Or Folder

Why is my computer saying diagnosing your PC?

Most likely correct, installation of update files failed. That's why your laptop or desktop computer is stuck in this restored image trying to diagnose your computer. When your device gets to the "automatic recovery screen", "Choose advanced options". Wait for your computer to finish uninstalling the update.